求中文版IEC标准！
拜托大家，有以下标准的能否上传一份，谢谢！Standards Descriptions
IEC-60034 (Part-1 to Part-19) Rotating electrical machines
IEC-60044-1 Currenttransformers
IEC-60044-2 Voltage transformer
IEC-60044-4 Instrument transformers: Measurement of Partial Discharges
IEC-60051(Part-1 to Part-9) Recommendations for Direct Acting indicating analogue electrical measuring instruments and their accessories.
IEC-60076 (Part-1 to Part -5) Power transformers
IEC-60076-10 Determination of transformer and Reactor Sound Levels
IEC-61095 Electromechanical Contactor for household and similar purposes
IEC-60099-425 Metal oxide surge arrestors without gaps
IEC-60129 Alternating CurrentDisconnectors (Isolators) and Earthing switches
IEC-1129 Alternating Current Earthing Switches induced Current switching
IEC-60137 Insulated bushings for alternating voltages above 1000V
IEC-60168 Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V.
IEC-60183 Guide to the selection of high voltage cables
IEC-60189 (Part-1 to Part- 7) Low frequency cables and wires with PVC insulation and PVC sheath
IEC-60214 On-Load-Tap-Changers
IEC-60233 Tests on hollow insulators for use in electrical equipment
IEC-60255 (Part-1 to Part-23) Electrical relays
IEC-60265 (Part-1 to Part 2) High voltage switches
IEC-60273 Characteristics of indoor and outdoor post insulators for systemswith nominal voltages greater than 1000V
IEC-60289 Reactors
IEC-60297 (Part-1 to Part- 4) Dimensions of mechanical structures of the 482.6mm(19 inches) series
IEC-60376 Specification and Acceptance of New SulphurHexafloride
IEC-60437 Radio interference Test on high voltage insulators
IEC-60507 Artificial pollution tests on high voltage insulator to be used on AC systems
IEC-60694 Common specification for high voltage switchgear & control gear standards
IEC-60815 Guidefor selection of insulators in respect of polluted conditions
IEC-60865 (Part-1& Part-2) Short Circuit Current – Calculation of effects
IEC-60354 Loading Guide for oil –immersed power transformers
IEC-62271-100 High voltage alternating current circuit breakers
IEC-62271-102 Alternating current disconnectors and earth switches
IEC-60427 Synthetic Testing of High Voltage alternating current circuit breakers
IEC-61264 Pressurized Hollow Column Insulators
IEC-60358 Coupling capacitors and capacitor dividers
IEC-60481 Coupling Devices for power line carrier systems
IEC-60529 Degree of protection provided by enclosures
IEC-60947-4-1 Low voltage switchgear and control gear
IEC-60439 (Part-1&2) Low voltage switchgear and control gear assemblies
IEC-60353 Line traps for A.C. power systems
IEC-60495 Single sideboard power line carrier terminals
IEC-60683 Planning of (single side-board)power line carrier systems
IEC-60359 Expression of the performance of electrical and electronic measuring equipment
IEC-60387 Symbols for alternating-current electricity meters
IEC-60447 Man Machine Interface (MMI)-actuating principles
IEC-60521 Class 0.5,1,and 2 alternating current watt hour meters
IEC-60547 Modular plug-in unit and standard 19-inch rack mounting unit based on NIM standard(for electronic nuclear instruments)
IEC-60305 Insulators for overhead lines with nominal voltage above 1000V-ceramic or glass insulator units for ac. Systems characteristics of string insulator units of the cap and pin type
IEC-60372 (1984) Locking devices for ball and socket couplings of string insulator units: dimensions and tests
IEC-60383 (Part-1&2) Insulators for overhead lines with a nominal voltage above 1000V
IEC-60433 Characteristics of string insulator units of the long rod type
IEC-60471 Dimension of clevis and tongue couplings of string insulator units
IEC-60227(part 1 to 7) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750
IEC-60228 Conductor of insulated cables
IEC-60230 Impulse tests on cables and their accessories
IEC-60287 (Part-1 to 3) Calculation of continuous current rating ofcables (100% load factor)
IEC-60304 Standard colours for insulation for low- frequency cables and wires
IEC-60331 Fire resisting characteristic of electric cables
IEC-60332 (Part-1 to 3) Tests on electric cables under fire conditions
IEC-60502 Extruded solid dielectric insulated power cables for rated voltages from 1kV up to 30kV
IEC-754 (Part-1 to 2) Tests on gases evolved during combustion of electric cables
IEC-60071 Insulation Co-ordination
IEC-60060 High voltage test techniques
IEC-60270 Partial discharge measurement
IEC-61233 Guide for inductive load switching
IEC-60298 AC metal enclosed switchgear and control gear up to 52kV
IEC-105 Bus bars (Aluminium)
IEC-61641 Enclosed low voltage switchgear and control gear assemblies. Guide for testing under conditions of arcing due to internal fault
IEC-60292 Starters
IEC-60146 Semiconductor converters and Pulse transformer
IEC-61000-1995 Electromagnetic compatibility (EMC)
IEC-60148 Semiconductor rectifier assemblies and thyristor converters
IEC-60034-34 Guide for testing three phase induction motors
IEC-60079 Classification of hazardous areas
IEC-60896 Lead acid type – With Plante positive plate
IEC-60309 Plugs, socket-outlets and couplers for industrial purposes
IEC-60598 Luminaries : General requirement
IEC-60726 Dry type power transformers
IEC-60870 Telecontrol equipment and systems
IEC-60874 Conductors for optical fibres
IEC-60921 Ballasts for tubular florescent lamps – Performance requirements
IEC-60929 AC-supplied electronic ballasts for tubular fluorescent lamps – Performance requirements
IEC-61850 Communication networks and systems in sub stations
IEC-60364 Electrical installations of buildings
IEEE-80 Std. 2000 Guide for safety in Alternating Current Sub station grounding
IEEE-665 Guide for generating station grounding
IEEE-446 Emergency standard power systems
IEEE-485 Recommended practice for sizing large lead acid storage batteries for generating stations and sub-stations
IEEE-519 Harmonic limits in power systems
IEEE-32 Requirements, Terminology and test procedure for Neutral Grounding Devices.
IEEE-48 Test Procedures and Requirement for High Voltage Alternating Current Cable terminations.
IEEE-81 Measuring Earth Resistivity Ground Impedance and Earth Surface Potentials of a Ground System.
ANSI/IEEE-242 Protection and Co-ordination of Industrial and Commercial Power Systems.
IEEE-422/1986 Guide for the Design and Installation of Cable Systems in Power Generating Stations.
IEEE/ 450-1995 Recommended Practice for maintenance, testing and replacement of Large lead Storage Batteries for Generating Stations and Substations.
IEEE-484 Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and Sub-stations.
IEEE/ 605 1998 Guide for Design of Sub-station Rigid Bus Structures.
IEEE/ 979 -1979 Guide for Sub-station Fire Protection.
IEEE/ 62.1/1984 IEEE Standard for Surge Arrestors for AC Power Circuits.
IEEE PAS VOL-97 Generator Neutral Grounding Some Aspects of Application for Distribution Transformer with Secondary Resistor and Resonant Types. 你要找的好多呀，不是很容易，不过可以找找看 找这个有什么用，这个是变化的，还不具备法律责任。。。
页:
[1]